CATEGORIES
PSR-RF
PSR-RF
BACKUP POWER SUPPLY MODULE WITH
TWO CHANNELS RADIO CONTROLLER
BACKUP POWER SUPPLY MODULE
Buffer power supply module is designed for the uninterrupted supply of equipment requiring the stabilized voltage of 12V/DC (+/-15%). The module has 2 outputs separately fused with PTC: 1 (1A max.) and 2 (0,3A max.
• destinated for supply MGSM xx ( MGSM 4.0, MGSM 5.0 ),
• for supply equipment: alarm systems, access control etc.
PSR-RF: RADIO CONTROLLER MODULE
Two channels, universal and indepedndent settings, hopping code receivers for universal application in alarms, security, access control and remote control systems.
• destinated for remote controlling MGSM xxx ,
• alarm systems: remote partition, zone bypassing, panic button etc.
• home automation, access controll- remote controlling: gates, roller system, locks, lighting, etc.
BUFFERED POWER SUPPLY MODULE
• switching mode power supply
- 1,3A total capacity: outputs (1,7A- total capacity: outputs + battery charge),
- automatic voltage regulation,
- microprocessor-based diagnostic of operation,
- short-circuit, overload and thermal protection,
• battery charge and controll system
- deep discharge battery protection (ON/OFF function),
- dynamic test of battery condition (ON/OFF function),
• outputs of power supply [2]:
- independent outputs: 1= 13,8V/1A & 2=13,8V/0,3A,
- short-circuit protection: PTC fuses,
• technical outputs [3]:
- F output indicating failure: output 1/2, low battery or battery failure, high input voltage
AC>24V (DC>30V)
- NAC output indicating failure of AC (~230V) power supply, (possible time delay setings: 1s, 300s, 1h, 6h),
- BUZ output for acoustic indicating the failure conditions : signal staccato
• operation and failure status signalling
- visual indicating of operation (LEDs)
- digital communications with MGSM 3.0x, possible send via SMS: status or failures
• configuration and programing
- jumpers (functions of PSR),
- software PARTNER GSM (content SMS: status, failures, events memory, ONLINE mode –
with MGSM xx connect)
RADIO CONTROLLER MODULE
• superheterodyne receiver module
- high sensitivity (-102 dB), stable and reliable performance, excellent anti-jamming ability,
- open area operating range up to 150 m,
- helical antenna,
- hopping code: transmission TX-RX,
• two channels
- relay type R1,R2 (2xC/NC/NO),
- independent operating: bi-stable, mono-stable, or real modes (real= operation following control button pressing ),
- digital communications with MGSM 3.0x, possible controll MGSM 3.0x v (arm/disarm, panic), possible send via SMS: status of relay outputs R1, R2
- control R1, R2: SMS with access code,
• settings stored in EEPROM memory
- all parameters and settings stored with EEPROM (when power supply failure) and restored
when power ON (times, status: relays outputs , etc.)
• operating with 48 transmitters
- transmitter's low battery monitoring ,
• configuration and programing
- programming procedure for settings: times, modes of relay outputs (without PC),
- software PARTNER GSM (content SMS: status, failures, events memory, ONLINE mode – with MGSM xx connect)
Product has been added
Product name: PSR-RF
Quantity:
In your shopping cart contains:
Products:
